DEI 600d Bedienungshandbuch PDF herunterladen (Seite 12)

Refer to Figure 5 for details.

FIGURE 5

EXTERNAL SYNCED BRIDGED OPERATION(control panel/inputs)

1. Master/Slave switch - set switch

on the first amp to Master/0 for

most systems. Set switch to

Master/180 to invert the phase of

both the master and any synced

amplifiers. Set the Master/Slave

switch on all synced amplifiers to

Slave.

2. Connect input signal from the head

unit or processor to the input RCA

jacks of the master amplifier.

3. Connect an RCA cable between the

INVERT OUT RCA jack of the master

amplifier and the INVERT IN jack of

slaved amplifiers.

4. For best matching of input gains,

connect the unused INVERT IN RCA

jack of the master amplifier to the

INVERT OUT RCA jack of the slaved

amplifiers. The slaved amplifier

ignores the signal supplied to the

INVERT OUT jack, but the additional

RCA cable connection helps mini-

mize ground potential differences

between the master and slave

amplifier inputs and results in a

more accurate output voltage

match.

5. The Bass EQ, subsonic switches and

frequency controls, and crossover

frequency conrols should be

matched on the both amps for best

results.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

DEI 600d Bedienungshandbuch Seite 12