DEI 600d Bedienungshandbuch PDF herunterladen (Seite 10)

8

© 1999 Directed Electronics, Inc

Refer to Figure 3 for details.

FIGURE 3

SYNCED GAIN OPERATION (control panel/inputs)

1. Master/Slave switch - set switch on

the first amp to Master/0 for most

systems. Set switch to Master/180

to invert the phase of both the

master and any synced amplifiers.

Set the Master/Slave switch on all

synced amplifiers to Slave.

2. Connect input signal from the head

unit or processor to the input RCA

jacks of the master amplifier.

3. Connect an RCA cable between the

INVERT IN RCA jack of the master

amplifier and the INVERT IN jack of

slaved amplifiers. Use “Y” adapters

to split the signal to each slaved

amplifier.

4. For best matching of input gains,

connect the unused INVERT OUT

RCA jack of the master amplifier to

the INVERT OUT RCA jack of the

slaved amplifiers. The slaved ampli-

fier ignores the signal supplied to

the INVERT OUT jack, but the addi-

tional RCA cable connection helps

minimize ground potential differ-

ences between the master and

slave amplifier inputs and results in

a more accurate output voltage

match .

5. Set subsonic, EQ, and crossover

controls to the positions for best

results.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare